Create, Dare, Be Passionate!
Sublicrylic Mini Contemporary Photo Block 80 x 60 x 20 mm
was €12.95 Special Price €10.96 €9.13
Availability: Out of stock
SKU
BST_CC50_SMALL-BLOCK
Are you looking for a decorative item, an original and trendy photo gift to give?
For individuals or photographers looking to offer innovative, high-quality products, you'll love our contemporary sublicrylic photo pad. Its rounded and square edges give it a trendy, stylish look.
The color reproduction on this product is professional quality; the colors are vibrant, and the thickness of the glass gives your image an exceptional 3D effect. Sublimation acrylic also allows for high-resolution transfer.
To create images, logos, and designs, adopt sublicrylic and personalize without limits! An innovative sublimation technique that will never cease to amaze you!
We recommend pressing this block for approximately 4 minutes 30 seconds at 200 degrees, protecting your surface with a silicone sheet.
The photo block comes in a gift box with a mini microfiber cloth.
A key feature of this Créadhesif productis that this photo block stands upright on its own. You can position it either horizontally or vertically. It is presented and delivered in a box, similar to a jewelry box.
Créadhesif's tip: for best results, we recommend placing this block in a well-lit room. The colors will be particularly vibrant and enhanced, making your images truly stunning. Also, use a sponge to remove any stubborn paper residue from the block. Hot peeling is a little more difficult on this type of material than on others, so we recommend using a damp sponge to remove any paper residue that may be stuck to the block during the peeling process.
Application Instructions:
1) When printing, do not print in reverse, as your image will be printed on the transparent part on the back of the product.
2) Place the transfer sheet, printed side up, in the center of the heat press.
3) Place the product on top of the image, coated side down.
4) Cover the product with a silicone sheet to protect the glass during pressing.
5) Press your item with medium/high pressure at 200°C for approximately 4 minutes 30 seconds using a heat press and a silicone sheet.
(The time may vary depending on your press's pressure; testing is highly recommended for optimal quality.)
6) When pressing is complete, immediately remove the transfer sheet from the item (hot peel) and allow your item to cool, printed side up, to prevent damage.
Write your own review