Create, Dare, Be Passionate!
3M Certified Reflective Poli-Flex
13,75 € 11,46 €
Availability: In stock
SKU
PLT_REFLEX_3M_4781
Discover our new 3M reflective vinyl (grey), ideal for customizing safety clothing. This vinyl is certified to 3M EN ISO 20471. This standard guarantees high visibility for the garments you customize andimproves the visibility of individuals exposed to traffic.
This vinyl is ideal for high-quality heat transfers. It can be used on a wide range of textiles and materials: cotton, poly/cotton, poly/acrylic, and unimpregnated nylon.
Product Advantages:
- Manufactured by the 3M Group
- Requires minimal pressure ; 3-3.5 bar is sufficient, preventing heat press marks on the fabric after transfer
- Highly reflective effect
- Flex certified to EN ISO 20471:2013
- Easy cutting and weeding
Créadhésif Tip: Press your heat transfer vinyl for 15 seconds at 160°C with medium pressure. To give a more flexible and lightweight effect to a solid color image, you can cut your logo or design into a 5 x 5 cm diamond shape. This will give you a textured finish, which is very flexible and less plasticky than standard solid color transfers.
Note: This product benefits from the Craft Master Distributor which guarantees you optimum quality of the products delivered, technical and professional support and product availability at a fair price.
Features:
- Pressing temperature: 160°C
- Pressing time: 15 sec
- Pressure: 3.5 bar
- Peeling: hot
- Film thickness: 160 µm
- Washing: up to 60°C inside out
- Tumble dryer safe
Application instructions:
1) Cut the material in reverse.
2) Weed the excess material.
3) Pre-press your fabric for 2-3 seconds to remove moisture.
4) Place your heat transfer vinyl on your fabric.
5) Position and press the vinyl onto the fabric with its polyester backing, protecting it with a matte finishing paper or a Teflon sheet, at 160°C – 15 seconds – medium pressure.
6) Peel the vinyl while still hot.
| Documents |
|---|
Write your own review
