Product for removing Flex and DTF - Décol'Flex & DTF

This product is strictly prohibited for delivery BY AIR to French overseas departments and territories and internationally. Any material or merchandise considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints, and chemical products).

Start your textile printing projects with complete peace of mind!

Made a mistake applying your heat transfer vinyl or during weeding? Is the final result not what you expected? Don't panic! This Décol'flex will allow you to easily remove heat transfer vinyl and flock from any textile.

Instructions:

1. Apply a generous amount of Décol'flex to the area of ​​the fabric where the vinyl is located using a spatula.
2. Once you have applied the Décol'flex, remove it by hand or with weeding tweezers. 
3. Remove the vinyl while wearing protective gloves.
4. After removing the vinyl, it is best to press the area, covering it with a sheet of paper, for 3 seconds at 160°C (320°F).

To remove the imprint left on the fabric, wash your fabric; it will be as good as new. 

Important: We recommend using this product on recently pressed t-shirts, for example, after an accidental press print. We cannot guarantee results on t-shirts that were printed several weeks or months ago. Depending on the fabric, the marks left on the t-shirt may vary in intensity. For best results, use this product on natural cotton fabrics.