Digicoat transparent

This product is strictly prohibited for delivery BY AIR to French overseas departments and territories and internationally. Any material or merchandise considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints, and chemical products).

Discover asimple solution to create your own embellishment materials!

To transfer an image onto a surface using sublimation ink, your surface must be treated with a polyester coating which, once hardened, allows the sublimation ink to transfer. If you are using sublimation-compatible items, they are already pre-treated.

However, on natural, untreated surfaces such as wood, metal, ceramic, leather, stone, glass, and other materials, this presents a real challenge. Digicoat Transparent allows you to treat all surfaces without a coating.

Digicoat Transparent was created to meet this challenge and is easy to use. It applies a clear base coat, allowing you to create your own range of consumables.

Instructions for use Shake :
well for 1 minute.

2. Ensure the surface to be coated is clean, dry, and free of grease.

3. For best results, apply Digicoat from a distance of 20 cm from the surface. For a high-gloss finish, apply several coats.

4. Allow to air dry for 10 minutes, then bake in an oven at 160°C for 15-20 minutes.

Caution: Aerosol products cannot be transported by air.