Create, Dare, Be Passionate!
Easy'Press 3 includes mug element
246,95 € 205,79 €
Availability: In stock
SKU
XNH_HP230N-2 + MPA-11
Easy'Press 3
This 2-in-1 heat press, with its iron-like design, is ideal for those who love personalizing textiles and mugs! Intuitive, easy to use, lightweight, portable, and easy to store, this modern press will quickly become your best ally for DIY projects!
Unlike an iron, the heat is evenly distributed across the entire surface of the plate, guaranteeing a consistent and high-quality transfer. The Easy'Press 3 features a ceramic-coated plate that produces dry, even heat. The heating plate measures 23.5 x 23.5 cm.
Fasterthan its predecessor, the Easy'Press 3 heats up more quickly. With an iron, you typically set the dial somewhere between linen, cotton, and silk, but you don't have precise temperature control. The Easy'Press 3 allows you to precisely adjust the temperature and application time using the integrated timer. Furthermore, its four handles allow you to apply more even pressure. With the Easy Press 3, you can reach a temperature of 200 degrees !
The Easy Press 3 includes a mug attachment to meet all your needs! Simple to use, just connect the attachment to the press to personalize any type of 11 oz mug: classic mug, money box, pencil holder, glitter mug, frosted mug, and more.
This heat press is comfortable to handle and guarantees perfect safety thanks to its insulated base, which allows you to set the press down between uses or let it cool down afterward. No contact with the heating plate is necessary, as you place your item to be personalized directly onto the silicone mat. Therefore, there is no risk of burns, unlike with a traditional heat press.
Key features:
✓ More precise and higher temperature: the Easy Press 3 reaches up to 200°C vs. 180°C for the Easy Press 2
✓ Improved heating speed
✓ Thicker heating plate for more even heating
✓ 2-in-1 transfer: on t-shirts and mugs
✓ Suitable for sublimation and flocking
Using it couldn't be simpler:
Press the ON/OFF button.
Set the temperature.
Set the pressing time.
Pre-press your blank garment for a few seconds to remove wrinkles from your t-shirt.
Place your garment, printed side down, onto the fabric.
Place a Teflon sheet to protect your garment (not essential but recommended).
Press the Start Timer button to begin the countdown and press.
Remove the machine when the timer beeps. Your creation is ready!
Créadhésif Info: it is important to apply good pressure throughout the pressing process to ensure a quality transfer onto the substrate.
If you need to perform a hot peel and it's not working easily, press down for a few seconds and try again.
After 10 minutes of inactivity, the press will automatically switch off.
Instructions for mugs:
• The temperature rises to 95°C, place the mug inside
. • Start the timer (Timing button), the temperature will then rise to the programmed temperature: 190-200°C.
• Once the temperature is reached, the timer starts. Your mug is ready!
Note: You must apply a longer pressing time (2 or 3 times longer) than indicated in the product specifications, which corresponds to the application time with a traditional heat press. Perform several tests to find the pressing time best suited to your material.
| Features | Technical Specifications:
|
|---|
Write your own review
