Effect flex is a shiny, glittery flex material.
For a show or your most modern and daring creations, this flex will adapt to all your desires.
Impressive results, guaranteed effect!
Note: Due to its production method, Spectrum flex has grooves approximately every 50cm.
Créadhesif Tip: Before starting production, always perform a test to find the right balance between pressure, time, and heating temperature. You can layer the confetti effect flex over Premium'flex PU, Classic'Flex PVC, flock, galaxy, puff, and sublitex flex. However, we do not recommend layering the confetti effect flex over Metalflex or glossy flex.
(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)
Composition:
Polyester/aluminum flex with glitter, for heat transfer onto cotton, polyester, acrylic, and similar fibers.
Width 50 cm.
Application conditions: 160°C, 15-20 seconds, peel off cool.
Washable at 40°C. Iron inside out.
Application instructions:
1) Cut the material in reverse with a flocking blade.
2) Weed the excess material.
3) Position and press the transfer onto the fabric with its polyester backing, protecting it with
silicone paper, at 150°C – 10 seconds – medium pressure.
4) Remove the polyester backing cool.
Precautions for use:
Carefully follow the instructions specified on the garment.
After pressing, wait 24 hours before the first wash.
Washing: 40°C max. inside out – do not use harsh products (bleach, etc.).
Dry cleaning: no
Ironing: on the reverse side
Storage of the reel: max. one year, vertically, in a dry place, 15-30°C,
protected from light.
| Documents |
|---|