Create, Dare, Be Passionate!
Flex Cut Sef - 50 CM WIDTH
2,74 € 2,28 €
Availability: In stock
SKU
SEF-FLEXCUT
This water-based is a heat-sealable film used for customizing professional textiles with long-lasting durability. Resistant and extremely flexible, this flex boasts a thin 60-micron , allowing you to create high-quality markings.
You will be able to make very fine detail cuts with easy and quick weeding for unparalleled work quality.
It can be applied to all types of cotton and polyester materials. Softand thin, this heat transfer vinyl will become your ideal partner for all your productions!
Looking for a professional finish with excellent durability? Try Flex Cut now.
Note: We do not recommend using Flex Cut over Velcut Flock effect. However, you can easily layer Velcut over Flex Cut!
Créadhésif Tip : To layer, reduce the application time of the first few layers to 3-4 seconds. Before starting production, always perform a test to find the right balance between pressure, time, and heating temperature.
(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)
Application tips:
1) Cut the heat transfer vinyl in reverse using a standard 45° blade.
2) Weed the excess material.
3) Position and press the vinyl onto the fabric with its polyester backing, protecting it with silicone paper or a finishing sheet. 150°C – 12 seconds – medium to high pressure.
4) Peel the vinyl while hot.
Precautions for use:
Carefully follow the instructions specified on the garment.
After pressing, wait 24 hours before the first wash.
Washing: 60°C max. inside out, do not use harsh products (bleach, etc.).
Dry cleaning: yes.
Ironing: inside out.
Roll storage: max. one year, upright, in a dry place, 15-30°C, protected from light.
| Documents |
|---|
Write your own review
