Glue destroyer

Caution : Adhesive Remover Pro may damage polycarbonate or other plastic surfaces (e.g., headlight lenses), synthetic materials such as acrylic, Plexiglas, Perspex, polystyrene, and varnished surfaces, especially if these substrates are old. Cracking may occur. Therefore, we recommend that all users of Adhesive Remover Pro test the product on a small, inconspicuous area first to check compatibility. 

The following steps are therefore strongly recommended:

1. To use this product, a minimum temperature of +10°C is required. In hot weather (+30°C), work in the shade.
2. Soak a lint-free cloth or a wide brush with Adhesive Remover.
3. Thoroughly coat the surface containing adhesive residue with Adhesive Remover Pro. The recommended reaction time/application time varies depending on the thickness of the layer, the composition, and the age of the adhesive, and is several minutes. AVOID immediately and vigorously rubbing off the adhesive residue, as this could scratch the surface. Allow the product time to work on the adhesive.
4. Liquefied adhesive residue impregnated with Adhesive Remover MUST be completely removed with a clean cloth. The use of several cloths is STRONGLYRECOMMENDED.
5. Adhesive Remover Pro is NOT SUITABLE for surface preparation prior to applying films. After using Adhesive Remover, we recommend thoroughly cleaning the surface with Surface Cleaner Pro before applying any new self-adhesive film.

The Adhesive Remover is designed so that it does not fall into the category of products that are hazardous to the environment.