Create, Dare, Be Passionate!
Liberty Subli for Virtuoso Sublijet
23,90 € 19,92 €
Availability: In stock
SKU
CFP_S701A
Do you want to personalize all types of colors and materials with a simple printer? Flex Liberty Subli is the product for you!
At 130 microns, this paper acts as a printable flex material and can be used with both inkjet and polyester sublimation printers (Sublijet inks) on light and dark cotton, polyester, elastane, or nylon fabrics.
This paper will allow you to achieve professional results, especially on all your dark fabrics that cannot be customized with standard Truepix paper. The result is stunning! It has a very soft, thin, and elastic feel, with deep and vibrant colors.
Easy to cut and weed, it will allow you to showcase all your creations. You can manipulate the paper by hand for simple shapes. However, it is recommended to use transfer tape for transferring lettering and fine designs.
Highly durable, it can be washed at 30°C, preferably on a short cycle. It's long-lasting, lasting up to 40 washes. We recommend washing your garment inside out and not using a tumble dryer.
Its advantages:
- A universal heat-sealable adhesive that can be used on all textiles
- A top coat layer that ensures compatibility with different types of inks
- Low-temperature pressing allows it to be used on all textiles, including delicate ones
- An adhesive polyester layer (liner) that highlights fine details
The Eco-Friendly Product Advantage: Made from water-based polyurethane, this innovative printable flex material releases only water, no solvents, into the atmosphere. This 100% French-made product is environmentally friendly and therefore harmless.
Créadhésif tip: If you are using a Sawgrass printer, select "Type A" paper and "Polyester" backing in the SPM software. Let your print rest for 5 minutes before pressing.
Pressing conditions: 15 seconds at 140°C.
Creation steps:
1. Create your design or import your photo (without a specific RIP).
2. Print your design without activating mirror mode (your design must be facing you during pressing) using a polyester sublimation printer or an inkjet printer. (Note: print with registration marks if you intend to cut with a plotter). Wait 5 minutes after printing, then cut and press, as the ink dries quickly.
3. Cut your design using a plotter or a simple pair of scissors.
4. Weed the edges.
5. Peel your design from the adhesive polyester backing by hand. For pre-spaced shapes (lettering), use transfer tape (wait 10 minutes before applying the tape).
6. Position your substrate and your design on the press. The transfer is quick and low-temperature: 15 seconds at 140 degrees Celsius, depending on your heat press. If you're using a black polyester t-shirt, 5 seconds of pressing is enough.
7. If you used transfer tape, peel it off when it's cold.
And that's it!
Washing instructions:
- Wash at 30°C
- Wait 24 hours before the first wash
- Wash separately
- Do not use harsh detergents
- Iron on the reverse side
| Features | Print settingsSAWGRASS
EPSON SC-F100
|
|---|
Write your own review