Multi-Trans Pro Paper, A3 Size

Multi-Trans PRO paper can be used on all types of laser printers. With this paper, you can finally easily personalize hard surfaces such as wood, paper, cardboard, cork and much more.

With its very short pressing time at low temperature, you can hot-peel your Multi-Trans PRO, making it one of the highest-performing products on the laser transfer market. Produce an endless variety of materials for all types of events, from weddings and restaurant or interior decorations to festivals.

This paper is applicable to Wood, Paper, Card, Metal, Mirrors, Glass, Leather, Cork

Applications: Cups, paper bags, wooden products, coasters, napkins, face masks (single use), plastic (PP) cups, book covers;...

1 pack = 100 sheets

Usage steps: 

1. Pre-press your product using the settings in the table below.
2. Place your design onto your substrate/product (printed side down) and, if necessary,
secure it with heat-resistant tape.
3. Press your transfer using the settings indicated below and cover it with the
silicone pads in the table below.
4. Peel off the transfer paper using the settings recommended in the table below.
CAUTION: At this stage, the substrate is very hot. Take care when handling it.
5. If indicated in the table below, press your product again at the same temperature as in step 3 for approximately 2 to 5 seconds.