Create, Dare, Be Passionate!
Mylar roll for textile transfer, 30 cm x 12 m
15,60 € 13,00 €
Availability: In stock
SKU
FRV_MYLAR
Be captivated by our latest innovation and fall in love with Mylar paper.
Designed for use with our Forever transfer papers, don't hesitate to stand out and create prints with a stunning metallic or multi-color effect. This product will allow you to enhance all your creations with an extraordinary, glossy, and metallic finish.
It is available in a 30 cm x 12 m roll.
All you have to do is choose! Mylar: a product you'll soon find indispensable!
It is used with Dark LowTemp Laser Paper for White Toner.
Créadhesif Tip: for best results, we recommend using a heat press with a side opening.
How to apply Mylar?
1) Print your image on your dark, no-cut, low-temp laser paper. For an even more metallic and intense mylar effect across your entire transfer, print your image in black: 4 colors composed of 100% Cyan, 100% Magenta, 100% Yellow, and 100% White.
2) Place sheet B (adhesive paper) on your paper A, position the assembly on your heat press, and protect it with a finishing sheet. Press for 90 seconds at 150°C–160°C (300°F–320°F) at low pressure.
off the backing
4) Position paper A on your fabric and press for 5–10 seconds at 155°C (310°F).
while cold.
6) Now place the Mylar sheet, colored side facing you, over the entire image or the portion of the image of your choice and press firmly for 30 to 45 seconds at 155°C.
7) Peel off the sheet once it has cooled.
Note: We recommend washing inside out at a maximum of 40°C!
Write your own review