Tajima TMEZ-KC Embroidery Machine Showroom

i-TM device

The i-TM device allows for optimal and automatic thread management.

Better productivity

Mass production can be launched quickly without laborious sampling.

DCP function

The independent digitally controlled presser foot is a revolutionary device developed by Tajima.

Stable, high-quality dots with i-TM and DCP

It is no longer necessary to adjust the upper thread tension according to the stitch, pattern or material, as skilled operators do on conventional embroidery machines.

Tajima's Digitally Controlled Presser Foot (DCP) measures fabric thickness at every stitch, and its Automatic Thread Management Technology (i-TM) automatically dispenses the correct amount of top thread based on fabric thickness and stitch length in just 0.05 seconds. The DCP also eliminates fabric flapping and ensures stable stitching.

Point 1 — Stable production of high-quality embroidery

Even if the item to be embroidered or the type of thread changes frequently, as in the case of a store order, the machine always provides the best possible stitches without the need to change the settings.

Point 2 — Significant reduction in the time between order and delivery

The time required for embroidery trials and adjustments is reduced, and the speed can be increased with less risk of thread breakage, resulting in an estimated 30% reduction in processing time compared to conventional machines.

Point 3 — Reduce quality defects

DCP reduces fabric flutter, resulting in fewer pressure marks and thread cutting errors, and therefore a reduction in the number of defective pieces.

Point 4 — Quick start of the embroidery service

Even in shops where operators are frequently replaced, anyone can easily produce professional-quality embroidery by simply learning the basic techniques. It's also possible to start an embroidery business from day one.

Fast and neat cap embroidery

A large-diameter axle makes it easy for anyone to install the cap frame. The three-point locking system between the feed ring and the frame ensures a more stable attachment, less needle breakage and pattern misalignment, at a maximum speed of 1,000 stitches per minute.

The reinforced arm supports heavy items

Three times stronger than the arms of traditional embroidery machines, they are better suited for embroidery on jackets and other heavy items.

Slim cylinder arm for small items

The small diameter of the cylinder arm and the bobbin cover make it easy to embroider finished products such as sleeves and pockets.

12.1-inch touchscreen

One of the largest control panels in the industry, with convenient icons and language switching available for machine operation.

Direct order

Located on the head, these control buttons allow control of the wire cutter and other functions at each voltage base, for increased production efficiency.

New automatic wire cutter

Eliminating the pricker makes coil replacement easier and allows for more stable cutting, with a 40% improvement compared to conventional machines.

The TMEZ-KC series of multi-head cylindrical arm embroidery machines are equipped with Tajima's latest and most advanced technologies. They are ideal for embroidering logos and emblems on products such as sportswear and caps, in small to medium production runs. Thanks to the i-TM and DCP systems, even beginners can embroider on any type of material, at high speed and with consistent quality.