2.5 kg of screen printing transfer powder - 80 to 200 microns

2.5 kg of transfer powder - 80 to 200 microns

This transfer powder is applied to your screen-printed transfer. After baking your transfer at 100°C for 1.5-2 minutes, the powder will melt into the ink. Finally, during the heat press transfer, the hot-melt powder is reactivated, allowing the ink to adhere to your fabric.

1/ Create these frames using a mirrored image.
2/ Print the colors onto silicone paper, reversing the direction of direct printing onto fabric, and finish with the white underlayer. Allow the inks to dry quickly between prints.
3/ Once all the colors are layered, sprinkle with powder and remove any excess. 4
/ Bake your transfer at 100°C (212°F) for 1 minute 30 seconds to 2 minutes. Your transfer is ready!

The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peel.

This technique is ideal when you want to store and preserve your transfer prints for on-demand printing on textiles.

The powder can be stored in a dry place for a period of 2 years

This powder gives your transfer excellent wash resistance (up to 90°C).