Create, Dare, Be Passionate!
FLEX SOFT NO CUT - 4 Colors 100 Sheets
120,00 € 100,00 €
Availability: In stock
SKU
FLEX-SOFT-A+B-
You can personalize your Flex Soft (no-cut) box by choosing 4 different colors from the 16 available shades, for a total of 25 A4 or A3 sheets of each color.
It's the ideal product for your small to medium multi-color print runs, allowing you to offer a variety of shades to your clients. Flex Soft (no-cut) requires no weeding, enabling you to create prints with exceptional detail and precision.
Save time and create highly detailed designs!
This paper is compatible with black and white or CMYK LED printers and copiers. With a standard office printer, printing in black will produce white, colored, metallic, or fluorescent designs. Therefore, you don't need a white toner printer or a cutting plotter.
This pack contains:
1 x 100 sheets of B-Paper (Low Temp),
1 x 25 sheets of Flex Soft (no cut) in your choice of Color 1
, 1 x 25 sheets of Flex Soft (no cut) in your choice of Color 2
, 1 x 25 sheets of Flex Soft (no cut) in your choice of Color 3
, 1 x 25 sheets of Flex Soft (no cut) in your choice of Color 4.
If you're unsure which color to choose, you can order the BASIC 7 FLEX-Soft No-Cut or PREMIUM 17 FLEX-Soft No-Cut
. This transfer consists of two sheets: sheet A (the colored sheet) is the one you'll print on, and sheet B will be placed on top of it.
Simply press the two sheets together to transfer the adhesive onto the transfer paper. Then, carefully separate the two sheets, and the adhesive from sheet B will transfer to the image on sheet A. All that's left is to press your design onto your t-shirt. Care is simple: just wash your t-shirt inside out at 40°C.
Bonus: The transfer is possible on many materials (cotton, blended fabrics, polyester, nylon, polypropylene, paper, wood).
Créadhésif Tip:Choose a printing option with a flatbed feed; select the "multi-purpose tray" for this purpose. Otherwise, your paper may be scratched and damaged during its passage through the printer.
This product contains 2 sheets:
A-FOIL: this sheet is used to print your design;
B-FOIL: this sheet is used to apply the adhesive to sheet A.
Application steps:
1) Print your design in reverse on paper A.
Position a sheet of paper, then place sheet B on top of paper A. Place the entire assembly on your heat press. Caution: do not cover with Teflon film. Cover with a second sheet of paper.
2) Press for 90 seconds for A4 format and 120 seconds for A3 format.
Set the temperature to 130°-135°C (color) or 140°C (white).
Apply approximately 3-4 bar of pressure (medium pressure).
3) While still hot, separate paper A and paper B with a smooth, even motion (without jerking) on the hot lower platen of your heat press.
You may wish to wipe the surface with a cloth, as the paper can be very hot.
The adhesive on paper B must remain on the colored sheet.
4) Position paper A on your support and a sheet of Teflon or parchment paper, then press for 30 seconds at 130-135°C or 140°C (adjust these settings according to the type of support). Apply medium to high pressure.
5) Let it cool, then peel off the colored sheet. Your product is ready.
| Documents | Download the guide in French in PDF format |
|---|
Write your own review
