Create, Dare, Be Passionate!
FLEX SOFT NO CUT - 1 Color 100 Sheets
Starting from €109.00, €90.83 was €120.00
Availability: In stock
More than 1% left in stock
SKU
FLEX-SOFT_A+B
With this new product, no more weeding!
This paper is compatible with black and white or CMYK LED printers and copiers. With a standard office printer, printing in black will produce white, colored, metallic, or fluorescent designs. Therefore, you don't need a white toner printer or a cutting plotter.
This transfer consists of two sheets: sheet A is the one you will print on, and sheet B will be placed on top of it. Simply press the two sheets together to transfer the adhesive onto the transfer paper.
Then, carefully separate the two sheets, and the adhesive from sheet B will transfer to the design on sheet A. All that's left is to press your design onto your t-shirt.
Care is simple: just wash your t-shirt inside out at 40°C.
This pack contains:
1 x 100 sheets of B-Paper (Low Temp) and
1 x 100 sheets of Flex Soft (no cut) in the color of your choice.
If you're unsure which shade to choose, you can order the BASIC 7 FLEX-Soft No-Cut or PREMIUM 17 FLEX-Soft No-Cut (A4 size).
A key advantage is that the transfer is possible on a wide variety of materials (cotton, blended fabrics, polyester, nylon, polypropylene, paper, wood).
Créadhésif Tip:Choose a flatbed printer; select the "multi-purpose tray" for this. Otherwise, your paper may be scratched and damaged during the printing process.
This product contains 2 sheets:
A FOIL. This sheet is used to print your design.
B FOIL. This sheet is used to apply the adhesive to sheet A.
Instructions:
1) Print your design in reverse on sheet A.
Position a sheet of paper, then place sheet B on top of sheet A. Place the whole assembly on your heat press. Caution: Do not cover with a Teflon sheet. Cover with a second sheet of paper.
2) Press for 90 seconds for A4 format and 120 seconds for A3 format.
Then, set the temperature to 130°-135°C (color) or 140°C (white).
Finally, apply approximately 3-4 bar of pressure (medium pressure).
3) While still hot, separate the still-warm sheets A and B with a smooth, even motion (without jerking) on the hot lower platen of your heat press.
thenwipe the surface with a cloth, as the paper may be very hot. However, theadhesive on paper B must remain on the colored sheet.
4) Position paper A on your support and a sheet of Teflon or parchment paper, then press for 30 seconds at 130-135°C or 140°C (adjust these settings according to the type of support). Apply medium to high pressure.
5) Let it cool, then peel off the colored sheet. Your product is ready.
| Documents | Download the guide in French in PDF format |
|---|
Write your own review
