Poli-Flex Turbo - Pressing in 3 or 5 seconds at 130°C or 160°C - 50 cm roll

Attention, only 50cm widths are sold while stocks last!

Poli-Flex Turbo

This thin, flexible, and elastic polyurethane film allows you to create all your transfers in just 3 to 5 seconds!
Suitable for all types of textiles, including cotton, polycotton, and polyester, it offers a wide range of colors.
This heat transfer vinyl is ideal for creating logos and markings in 3 or 4 colors and for designing on t-shirts, tote bags, and sweatshirts for everyday wear. Italso offers a smooth, matte finish with a screen-printed look and excellent opacity. Furthermore, its highly adhesive, heat-fusible liner allows for easy cutting of small designs with effortless weeding.

Discover 3 types of Poli-Flex: classic, metallic, neon

Product Advantages: 
- A truly matte finish, a stunning result!
- Does not require high pressure , 2.5/3 bars are sufficient, which avoids the problem of heat press marks on the textile after transfer 
- The possibility of express pressing : 160°C for 3 seconds or 130°C for 5 seconds depending on the materials
- A 100 micron liner which allows a greater margin of error when cutting with the plotter
flex highly resistant that is tumble dryer safe (inside out)
- A flex that does not retain "pilling" from textiles
- The added benefit: this flex meets Oeko-Tex Class 1 standards and has the "Vegan" label. 

Note: This product benefits from the Craft Master Distributor which guarantees you optimum quality of the products delivered, technical and professional support and product availability at a fair price. 

Créadhésif Tip: When layering Poli-Flex Turbo, we recommend pressing the last color at 150°C for 10 seconds and removing the liner once it has cooled. This will prevent the flex material from detaching prematurely.

Recommendation for Pressing Nylon: For nylon, a multi-step pressing process is necessary.
- First, press the fabric for 5 seconds without any heat transfer vinyl applied.
- Then, press the vinyl for 5 seconds and remove the backing while still hot.
- Press the vinyl again for 10 seconds with a protective paper covering it. And that's it!

(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)