Poli-Flock
This film is made from viscose and polyamide fibers, giving it an incredibly soft, velvety feel! You'll be captivated by its quality and adhesive liner, which offers optimal coverage thanks to its thick, compact fibers.
Suitable for all types of textiles, including cotton, polycotton, and polyester, it comes in a wide range of colors and can be pressed in just 15 seconds! It's also easy to work with and weeds effortlessly.
Poli-Flock will become your best ally for creating logos and markings in 3 or 4 colors, perfect for designing on t-shirts, tote bags, and sweatshirts for everyday use, sportswear, or any type of workwear.
Made from eco-friendly and harmless materials, this film is free of PVC and plasticizers, resulting in OEKO-TEX STANDARD 100 certification.
Product Benefits:
- Ultra-soft feel
- High-quality, thick, and compact fiber coverage
- Requires minimal pressure ; 2 bars are sufficient, preventing heat press marks on the fabric after transfer.
(If the marking issue persists, reduce the pressure.)
- flock Highly durable that is tumble dryer safe (inside out)
- weeding Very easy
- Eco-friendly: this flex material meets Oeko-Tex standards and is vegan-certified.
Note: This product benefits from the Craft Master Distributor which guarantees you optimum quality of the products delivered, technical and professional support and product availability at a fair price.
Créadhésif Tip: If you want to apply pressure close to buttons, zippers or seams, we recommend placing a small Teflon cushion under the fabric so that the pressure is even during the transfer.
Overlay Recommendations: You can overlay flocking onto thin, smooth flex materials like Poli-Flex Turbo. However, it is not recommended to overlay one Poli-Flock onto another Poli-Flock or onto any other specific flex material such as neon flex, glitter flex, etc.
Pressing Recommendations: Unlike other types of flex, we advise against repressing Poli-Flock with a finishing sheet after the transfer. Doing so risks flattening the flock and degrading the quality of the final result on the t-shirt.
(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)
Application tips:
1) Cut the flock in reverse (be careful not to cut too deeply to avoid it getting caught in the cutting line).
2) Weed the excess material.
3) Pre-press your fabric for 2-3 seconds to remove moisture.
4) Position the flock on your fabric.
5) Position and press the design onto the fabric with its polyester backing, protecting it with Teflon paper, at 160°C – 15 seconds – medium pressure.
6) Apply the heat peel.
| Documents |
|---|