Poli-Flex Turbo

Poli-Flex Turbo - Pressing in 3 or 5 seconds at 130°C or 160°C - 30cm roll

Poli-Flex Design

Poli-Flex Design

Cutting flock - Poli-Flock - 50 cm roll

2,41 € 2,01 €
Availability: In stock
SKU
PLT_POLI_FLOCK_50CM
Color
 
 
 
 
 
 
 
 
 
 
 
 

Please note that only 50cm widths are sold while stocks last!

This film is made from viscose and polyamide fibers, giving it an incredibly soft, velvety feel! You'll be captivated by its quality and adhesive liner, which offers optimal coverage thanks to its thick, dense fibers.

Suitable for all types of textiles such as cotton, polycotton, and polyester, it offers a wide range of colors and can be pressed in just 15 seconds! It also offers ease of use and very simple weeding. Poli-Flock will become your best ally for creating logos and markings in 3 or 4 colors and for designing on t-shirts, tote bags, and sweatshirts for everyday use, in sportswear, or for all types of workwear.

Made from environmentally friendly and harmless materials, this film excludes the use of PVC and plasticizers, resulting in OEKO-TEX STANDARD 100 certification.

Product Benefits: 
- Ultra-soft feel 
fiber coverage thick, and compact

- Requires minimal pressure; 2 bars are sufficient, preventing heat press marks on the fabric after transfer.
- Highly durable, allowing it to be tumble dried (inside out)
- weeding Very easy 
- Eco-friendly: this heat transfer vinyl meets Oeko-Tex standards and is vegan-certified. 

Note: This product benefits from the Craft Master Distributor which guarantees you optimum quality of the products delivered, technical and professional support and product availability at a fair price. 

Créadhésif Tip: If you want to apply pressure close to buttons, zippers or seams, we recommend placing a small Teflon cushion under the fabric so that the pressure is even during the transfer. 

Overlay Recommendation: You can overlay flock over thin, smooth flex materials like Poli-Flex Turbo. However, it is not recommended to overlay one Poli-Flock over another Poli-Flock or over any other specific flex material such as neon flex, glitter flex, etc. 

Pressing Recommendation: Unlike other types of flex, do not re-press Poli-Flock with a finishing sheet after the transfer. Doing so risks flattening the flock and compromising the quality of the finished image on the t-shirt.

(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)

Application tips:
1) Cut the flock in reverse (be careful not to cut your flock too deeply to avoid it getting stuck in the cutting line)

2) Weed the excess material.
3) Pre-press your textile for 2-3 seconds to remove moisture.
4) Place your flock on your textile.
5) Position and press the flock onto the textile with its polyester backing, protecting it with Teflon paper, at 160°C – 15 seconds – medium pressure. 
6) Perform your heat peel.

More information
Documents
Write your own review
You are commenting on:Cutting Flock - Poli-Flock - 50 CM Roll
Your rating
We've found some other products that might interest you!