Create, Dare, Be Passionate!
Flex Printable Stahls SportsFilm - 50 cm x 25 m
202,40 € 168,67 €
Availability: In stock
SKU
STH_SPORTSFILM_CADCOLOR
New! A perfect application in just 5 seconds!
Printable polyurethane heat transfer film for solvent and eco-solvent printers.
This thin, flexible, matte-finish heat transfer vinyl is ideal for cutting small designs. SportsFilm printable vinyl can be cut after a short heating time, significantly increasing your productivity. It is compatible with a wide range of textiles currently on the market and is perfect for designs on sports jerseys. Colors remain vibrant even after multiple washes.
Advantages:
- Easy to handle
- Easy to cut
- Matte finish
- Can cut fine details
- Easy to weed
- Requires a heat transfer film.
We recommend using it on 100% cotton, 100% polyester, blended fabrics (polyester/cotton), Lycra, braided nylon, and other similar materials. Always test before launching into production.
Characteristics:
Roll dimensions: 25 m x 50 cm
Thin material: 85 microns
Price per m²: €12.26/m²
Créadhésif Tip: Make sure to do cutting tests beforehand to determine which blade will be the most suitable.
Precautions for use:
Carefully follow the instructions specified on the garment.
After pressing, wait 24 hours before the first wash.
Wash at a maximum of 40°C inside out. Do not use harsh products (bleach, etc.).
Dry cleaning: no.
Ironing: inside out. Roll
storage: maximum one year, upright, in a dry place, 15-25°C, protected from light.
Application Instructions:
1) Printing and Cutting
- Prepare the design for printing in positive format, following your printer's operating instructions (do not print in mirror image!). Check the printing and drying temperatures of the inks.
Use the appropriate print profile (for example, on Roland printers, select Colorip or Versawork, then the TTRH textile profile).
- Cut immediately after printing your design.
2) Heat Transfer
- Weed any excess material.
- Apply the application tape to your design, ensuring all air bubbles are removed. Peel back the backing film to reveal the adhesive side.
- Pre-press your garment for 3 to 5 seconds at 150°C to remove any creases or moisture.
- Position and press the design onto the fabric (previously protected with silicone paper) at 160°C for 10 seconds at medium pressure.
- If you used application tape, peel it off while still hot.
| Manufacturer | Stahls |
|---|
Write your own review