Create, Dare, Be Passionate!
Siser PS Electric - Flex Film
4,95 € 4,12 €
Availability: In stock
SKU
SSR_PS_ELECTRIC
This Flex has a soft and very fine finish, it is available in 6 colours.
Its unique composition allows for the layering of two PS Electric sheets, or Flex PS Film on top of PS Electric, enabling you to create unique and original visuals with a multitude of colors and effects. The available electric colors have a subtle metallic sheen, allowing you to bring brightness and a modern touch to your creations.
Easy to cut and weed, this heat transfer vinyl can be peeled off hot or cold. It is particularly resistant to washing. It can be applied to cotton, polyester, and poly/cotton blends. Please note, it cannot be applied to treated, dyed, or sublimated fabrics.
This flex fabric has OekoTex Standard 100 certification.
Made in Italy, this high-quality flex offers you unparalleled product quality.
Créadhésif Tip: Before starting production, always remember to carry out a test to find the right balance between pressure, time and heating temperature.
(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)
Application instructions:
1) Print and cut the material in reverse using a standard flex blade.
2) Weed the excess material.
3) Place your flex material on your fabric.
4) Position and press the marking onto the fabric with its polyester backing, protecting it with Teflon paper, at 150°C for 15 seconds at medium pressure.
5) Peel the film using either hot or cold methods.
Care instructions: Carefully follow the instructions on the garment.
After pressing, wait 24 hours before the first wash.
Washing: 60°C max. inside out, do not use harsh products (bleach, etc.).
Dry cleaning: no.
Ironing: inside out.
Suitable for the cotton cycle in the dryer.
| Manufacturer | Siser |
|---|---|
| Documents |
Write your own review
