Create, Dare, Be Passionate!
Flex Brick Size - 50 cm wide
6,49 € 5,41 €
Availability: In stock
SKU
SSR_BRICK
Siser Brick is the ideal heat transfer vinyl to give your creations a 3D effect. This very thick vinyl will add depth and originality to your projects.
With a thickness of 1000 microns, it is particularly popular for thick knits, such as sweatshirts, and for large lettering.
It is very easy to cut and weed while offering excellent wash resistance. It can be applied to cotton, polyester, and polycotton blends.
This flexible material complies with REACH standards and is certified Oeko-Tex® Standard 100 Class II.
This item is available while stocks last. It will soon be replaced by the Flex Brick Siser in 600 mm.
Créadhésif Tip: We recommend using this heat transfer vinyl with a 60-degree blade for cutting large lettering. We do not recommend it for fine details. Letters should be at least 2 cm high.
(The color swatches you see on your screen are in RGB and may differ from one screen to another depending on their calibration. To view the actual colors, we therefore advise you to refer to the color charts we offer by clicking HERE .)
Application instructions :
1) Cut the flex material in reverse with a 60° blade.
2) Weed the excess material.
3) Position and press the design onto the garment with its polyester backing, protecting it with a Teflon sheet, at 155°C for 20 seconds at medium pressure.
4) Peel the backing off when cold.
Note: For bright colors (Gold and Silver) only:
Position the backing on the heat press, cover it with a Teflon sheet, and press again for 5 seconds. Remove the backing when cold.
Care instructions:
Carefully follow the instructions on the garment.
After pressing, wait 24 hours before the first wash.
Washing: 60°C max. inside out. Do not use harsh products (bleach, etc.).
Dry cleaning: No.
Ironing: Inside out.
Tumble dry on cotton cycle.
| Manufacturer | Siser |
|---|
Write your own review
